Hot air stenter setting machine series

1. Purpose

　This machine is suitable for impregnating auxiliary, tentering, drying and shaping of pure cotton, polyester cotton, polyester, acrylic and their blended fabrics.

2. Technical characteristics

　1. Mechanical width: 1800-3600mm

　2. Machine speed: 20-120m/min

　3, form: card clothing dual-purpose clip horizontal operation

　4. Drying room: horizontal drying room, 6 sections, 7 sections, 8 sections, 9 sections, etc., modular combination.

　4. Steaming temperature: the highest temperature is 220℃, which can be set independently

　5. Heat source: steam, heat transfer oil, electric heating, natural gas.

　6. The drying room adopts multi-wing circulating fan and rolled aluminum fin radiator, which has high thermal efficiency and uniform temperature in the drying room.

   7. The frame adopts standard profiles, welded into a separate circulation cavity, and has an anti-drip device on the top.

　8. Transmission mode: AC frequency conversion multi-unit synchronous speed regulation.